English
20KHZ nwere ọgụgụ isi Ultrasonic welder maka ngwa ahụike yana ngwa eletrọnị egosipụtara onyonyo.
  • 20KHZ nwere ọgụgụ isi Ultrasonic Welder maka ngwa ahụike na ngwa eletriki
  • 20KHZ nwere ọgụgụ isi Ultrasonic Welder maka ngwa ahụike na ngwa eletriki
  • 20KHZ nwere ọgụgụ isi Ultrasonic Welder maka ngwa ahụike na ngwa eletriki
  • 20KHZ nwere ọgụgụ isi Ultrasonic Welder maka ngwa ahụike na ngwa eletriki

20KHZ nwere ọgụgụ isi Ultrasonic Welder maka ngwa ahụike na ngwa eletriki

Nkọwa dị mkpirikpi:

Anyị bụ ndị ọkachamara emeputa ngwa ultrasonic nwere ọgụgụ isi.

Nleba anya dijitalụ akpaaka;Njikwa njupụta dijitalụ;

Ọsọ mmalite na-achịkwa;Ụdị ịgbado ọkụ dị iche iche;

Dekọọ parameters nke ịgbado ọkụ ọ bụla

Nyocha onwe na njikwa; mmepụta ihe nleba anya

Ụdị: MY-SZN2022-S/MY-SZN2026-S/MY-SZN2032-S
Ugboro: 20k
Ike: 2200w/2600w/3200w
Voltaji: 110V/220V

Mould: Enwere ike ịhazi ya site na ngwaahịa gị


Nkọwa ngwaahịa

Kpọtụrụ anyị

Mkpado ngwaahịa

Nkọwapụta

Nlereanya MY-SZN2022-S MY-SZN2026-S MY-SZN2032-S
Ugboro ugboro 20k 20k 20k
Ike 2200w 2600w 3200w
Voltaji 110V/220V 110V/220V 110V/220V
Oge ịgbado ọkụ 0.01-9.99s 0.01-9.99s 0.01-9.99s
Ibu 120kg 120kg 120kg
Nha igwe 700*398*1185mm 700*398*1185mm 700*398*1185mm
Akwụkwọ ikike 1 afọ 1 afọ 1 afọ
Ọrụ OEM/ODM OEM/ODM OEM/ODM
Ụdị ebugharị Pneumatic (ikuku Pipe dayameta 8mm) Pneumatic (ikuku Pipe dayameta 8mm) Pneumatic (ikuku Pipe dayameta 8mm)

 

Atụmatụ

Nke a bụ njirimara nke ultrasonic plastic welder nwere ọgụgụ isi, anyị ga-enye gị ngwọta ultrasonic kachasị mma dị ka ihe ịgbado ọkụ gị chọrọ.

Ụdị atọ: ọnọdụ ike, ọnọdụ oge na ọnọdụ omimi

2. Nabata CHEKIC pneumatic pats na usoro njikwa, ike mmepụta kwụsiri ike.

3. Nabata onye transducer mbụ sitere na Taiwan, onye na-ebuli elu titanium alloy siri ike ma na-adịgide adịgide, etiti ígwè na kọlụm square, arụ ọrụ nrụgide ngwa ngwa na-enweghị tilt.

4.Adopt dijitalụ voltaji regulator nke generator, mmepụta ike kwụsiri ike, Humanized ihuenyo mmetụ ọrụ, paswọọdụ nchedo management, ịgbado ọkụ parameters nwere ike ichekwa.Ngosipụta mgbanwe.

Enwere ike ịhọrọ ụdịdị ịgbado ọkụ dị iche iche, nleba anya ugboro ugboro, yana oke ịgbado ọkụ.

Uru asọmpi

△ Oke arụmọrụ --- Ọ na-ewe naanị 0.1-3 sekọnd n'oge ọ bụla.

△ Ike dị elu --- nkwonkwo weld nwere ike iguzogide nnukwu ike ike na nrụgide dị elu.

△ Ogo dị elu --- nkwonkwo weld na-ekpuchi mmiri na ikuku;arụ ọrụ ikuku na-ekwe nkwa.

△ Economy --- Debe ọnụ ahịa ma belata ikike mmadụ site na iwepu skru na gluu.

Ihe ngosi ụlọ ọrụ

Asambodo

FAQ

Ajụjụ: Ị nwere ike ịhazi igwe ahụ dabere na ihe anyị chọrọ?

A: Ee, anyị nwere ike.Enwere ike ịhazi ebu ahụ dabere na nlele gị, voltaji nwere ike ịbụ 110V ma ọ bụ 220V, enwere ike dochie plọg gị na nke gị tupu ebupu ya.

Ajụjụ: Kedu ihe m kwesịrị ịnye iji nweta atụmatụ ịgbado ọkụ na ọnụahịa ziri ezi?

A: Biko nye ihe, nha nke ngwaahịa gị na ihe ịgbado ọkụ gị chọrọ, dị ka mmiri na-adịghị, ikuku siri ike, wdg. Ọ ga-aka mma ịnye ihe osise 3D ngwaahịa, anyị nwere ike inyere aka ịlele ma ọ bụrụ na ọ dị mkpa ka agbanwee eserese ahụ.Nke mere na ngwaahịa ngwaahịa rọba nwere ike mezuo ihe achọrọ nke teknụzụ ịgbado ọkụ ultrasonic.

  • Nke gara aga:
  • Osote:

    • J9XG}SB6

    Dee ozi gị ebe a ziga anyị ya

    Ụdị ngwaahịa

    Pịa tinye ka ịchọọ ma ọ bụ ESC mechie